Fiber optic patch cables could be damaged during installation.Protect it from damage by choosing a pulling eye. The pulling eye ensures that the strength member of the cable is pulled instead of the fiber core or jacket. Here’s the easy way to pull pre-terminated patch cable by using the Pulling Eye kit, Pulling eye kits protect pre-terminated patch cables during installation conduits, ducts or risers. Saving time and costs when install the pre-connectorized multi fiber cable.The pulling eyes GoodFtth Communication provides are high tensile.
SC Premium Connector 1.2mm series is designed to exceed the telecommunication industry’s rigorous testing requirements for years of reliable service. It will accept smaller 1.2mm cable that is commonly found in highly dense Telco cable racks and cabinets.
OM3 is a 50um core diameter multimode fiber optimized by 850nm laser. In 10Gb/s Ethernet using 850nmVCSEL, the fiber transmission distance can reach 300m; OM4 is an upgraded version of OM3, OM4 multimode fiber optimizes the OM3 multimode fiber Due to the differential mode delay (DMD) generated during high-speed transmission, the transmission distance has been greatly improved, and the optical fiber transmission distance can reach 550m.
The key difference between them is that under 4700MHz-km, the EMB of OM4 fiberis only specified as 850 nm, while the OM5 EMB value is specified as 850 nm and953 nm, and the value at 850 nm is greater than OM4. Therefore, OM5 fiber provides users with longer distances and more fiber options. In addition, TIA has designated lime green as the official cable jacket color for OM5.OM4 is designed for 10Gb/s, 40Gb/s and 100Gb/s transmission, but OM5is designed for 40Gb/s and 100Gb/s transmission, which can reduce the number ofoptical fibers for high-speed transmission.
Fullaxs,a standard waterproof interface, designed & developed by TE is widely used for the wireless base station linked to FTTA equipment in harsh outdoor environment. Compared with ODVA or standard PDLC , Fullaxs has better waterproof performance even up to IP68 rate,and it also has higher sealability and strength.
OFNP stands for Optical Fiber Nonconductive Plenum. OFNP cables have fire-resistanceand low smoke production characteristics. They can be installed in ducts,plenums and other spaces used for building airflow. This is the highest fire rating fiber cable and no other cable types can be used as substitutes.
OFNR stands for Optical Fiber Nonconductive Riser. OFNR cables are used in Riser areas which are building vertical shafts or runs from one floor to another floor. OFNR cables can not be installed in plenum areas since they do not have the required fire and smoking rating as Plenum rated cables. OFNP plenum cables can be used as substitutes for OFNR cables.
