Fiber optic splitter is an integrated wave guide optical power distribution device that can split an incident light beam into two or more light beams, and vice versa, containing multiple input and output ends. An optical splitter plays an important role in passive optical networks (suchas EPON, GPON, BPON, FTTX, FTTH, etc.) by allowing a single PON interface to be shared among many subscribers.
The passive optical splitter can split/separate an incident light beam into several light beams at a certain ratio. The 1x4 split configuration presented below is the basic structure: separating an incident light beam from a single input fiber cable into four light beams and transmitting them through four individual output fiber cables. For instance, if the input fiber optic cable carries 1000Mbps bandwidth, each user at the end of output fiber cables can use the networkwith 250 Mbps bandwidth.
GoodFtth’s optical splitter can be terminated with different forms of connectors, and the primary package could be box type or stainless tube type. Fiber optic splitter box is usually used with 2mm or 3mm outer diameter cable, while the other is normally used in combination with 0.9mm outer diameter cables. Besides, it has variously different split configurations, such as 1x2, 1x8, 2x32, 2x64, etc.
Application:
LAN System
CATV System
Testing Equipment
Telecommunication System
Feature:
Low PDL.
Low Insertion loss
Excellentuniformity
Good repeatability
1×N bare PLC Splitter Specification | ||||||||||||
Port Configuration | Ch | 1*2 | 1*4 | 1*8 | 1*16 | 1*32 | 1*64 | |||||
Fiber Type | SMF-28e, G652, G655, G657 (or Customized) | |||||||||||
Operating Wavelength | nm | 1260-1650 | ||||||||||
IL | Typical(dB) | ≤3.9 | ≤7.2 | ≤10.3 | ≤13.6 | ≤16.9 | ≤20.2 | |||||
UL | dB | ≤0.5 | ≤0.6 | ≤0.8 | ≤1.0 | ≤1.3 | ≤1.8 | |||||
PDL | dB | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.4 | |||||
RL | dB | ≥50 | ||||||||||
Directivity | dB | ≥55 | ||||||||||
Operating Temperature | ℃ | -40~+85 | ||||||||||
Storage Temperature | ℃ | -40~+85 | ||||||||||
Steel Tube Size | mm | 40*4*4 | 40*4*4 | 40*4*4 | 50*7*4 | 50*7*4 | 60*12*4 | |||||
2×N bare PLC Splitter Specification | ||||||||||||
Port Configuration | Ch | 2*2 | 2*4 | 2*8 | 2*16 | 2*32 | 2*64 | |||||
Fiber Type | SMF-28e, G652, G655, G657 (or Customized) | |||||||||||
Operating Wavelength | nm | 1260-1650 | ||||||||||
IL | Typical (db) | ≤4.0 | ≤7.6 | ≤10.8 | ≤14.1 | ≤17 | ≤20.5 | |||||
UL | dB | ≤1 | ≤1.4 | ≤1.5 | ≤2 | ≤2.5 | ≤2.5 | |||||
PDL | dB | ≤0.2 | ≤0.2 | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.5 | |||||
RL | dB | ≥50 | ||||||||||
Directivity | dB | 55 | ||||||||||
Operating Temperature | ℃ | -40~+85 | ||||||||||
Storage Temperature | ℃ | -40~+85 | ||||||||||
Steel Tube Size | mm | 60*7*4 | 60*7*4 | 60*7*4 | 60*7*4 | 80*20*6 | / | |||||
