Fiber Optical PatchCord (Patch Cable or jumper) is an optical cable assembly that has fiber connectors installed on one or both ends. General use of these cable assemblies includes the interconnection of fiber cable systems and optics-to-electronic equipment. Single mode patch cord uses 9/125um glass fiber, Multimode patch cord uses 50/125um or 62.5/125um glass fiber.Singlemode and multimode refer to the fiber cable types. Singlemode patch cord can be used in long distance data transmission. Multimode patch cord usually usesin short distance transmission. Typical singlemode patch cords are in yellow cable jacket; Typically multi mode patch cord used orange cable jacket for OM1/OM2,aqua for OM3,magenta for OM4 and lime green for OM5.The regular cable material canbe: PVC, Riser, Plenum, OFNR, OFNP or LSZH. Typical the outer diameter for simplex cable is usually 3.0mm, 2.0mm&0.9mm.
MTRJ patch cords are always duplex,come with 2.0mm zipcord duplex(2 cores) cables,available for singlemode(652D,G657A1/G657A2/G657B3 or G655.) and multimode(OM1/OM2/OM3/OM4/OM5),it can be male or female,if the connector is male,that is to say the connector comes with two pins,female connectors don't have pins,please specify befor inquiry.
Application:
Indoor network wiring distribution
Data Transmission System
Optical Access Network
LAN System
Feature:
Good mechanical characteristics
Excellent Termination Strength
High Tension and Stability
Low Insertion Loss
Specification:
Connector Type | Performance Data | |||
Connector | Polishing Mode | IL(dB) | RL(dB) | |
SC/LC/FC/ST/MU/E2000/SMA | SM | UPC | ≤0.3 | ≥50 |
APC | ≤0.3 | ≥60 | ||
MM | PC | ≤0.3 | ≥35 | |
MTRJ | SM | PC | ≤0.5 | ≥50 |
MM | PC | ≤0.5 | ≥35 | |
